M4A5-32/32-10VC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 1250 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 900 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-32/32-10VC Overview
There are 32 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is packaged with 44-TQFP.This device has 32 I/O ports programmed into it.There are 44 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.Power is provided by a supply voltage of 5V volts.This part is in the family [0].The chip should be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].The chip should be mounted by Surface Mount.The ispMACH? 4Aseries FPGA is one of these types.There are 44 pins on the chip.When using this device, YESis also available.Its related parts can be found in the [0].In digital circuits, 1250gates serve as building blocks.For high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.In this case, Surface Mountis used to mount the electronic component.There are 44 pins on the device.There is a maximum supply voltage of 5.25V.Despite its minimal supply voltage of [0], it is capable of operating.It runs on 5Vvolts of power.There are 900 Programmable I/Os.It should be below 100MHzat the maximal frequency.
M4A5-32/32-10VC Features
44-TQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
5V power supplies
M4A5-32/32-10VC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-10VC CPLDs applications.
- Voltage level translation
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Timing control
- I/O PORTS (MCU MODULE)
- State machine control
- Synchronous or asynchronous mode
- Power Meter SMPS
- ROM patching
- Code converters
- Bootloaders for FPGAs
