M4A5-32/32-10VC48
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 1250 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-32/32-10VC48 Overview
A mobile phone network consists of 32macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).48-LQFPis the package in which it resides.There are 32 I/Os on the board.There are 48 terminations programmed into the device.There is a QUADterminal position on the electrical part in question.A voltage of 5Vprovides power to the device.This part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.During operation, the operating temperature is kept at 0°C~70°C TA to ensure its reliability.Mount the chip by Surface Mount.It belongs to the ispMACH? 4Aseries of FPGAs.48pins are programmed on the chip.This device can also display [0].According to the M4A5-32, its related parts can be found.A digital circuit is built using 1250gates.High efficiency requires the supply voltage to be maintained at [0].It is recommended that data be stored in [0].Surface Mountis used to mount this electronic component.There are 48pins on it.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.In order for it to operate, a supply voltage of 4.75Vis required.A power supply of 5Vvolts is required to operate this device.There are 680 programmable I/Os in this system.The maximal frequency should be lower than 100MHz.
M4A5-32/32-10VC48 Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
48 pin count
48 pins
5V power supplies
M4A5-32/32-10VC48 Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-10VC48 CPLDs applications.
- Dedicated input registers
- Code converters
- USB Bus
- Field programmable gate
- Software-driven hardware configuration
- PULSE WIDTH MODULATION (PWM)
- Timing control
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Parity generators
- POWER-SAVING MODES
