M4A5-32/32-10VI48
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 1250 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 516 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-32/32-10VI48 Overview
In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.The item is enclosed in a 48-LQFP package.In this case, there are 32 I/Os programmed.Terminations of devices are set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power source is powered by 5Vvolts.There is a part included in Programmable Logic Devices.The chip should be packaged by Tray.The operating temperature of the machine is -40°C~85°C TA to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4A series.A chip with 48pins is programmed.If you use this device, you will also find [0].In accordance with the [0], its related parts are listed.A digital circuit can be constructed using 1250gates.For high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.This electronic part is mounted in the way of Surface Mount.The 48pins are designed into the board.It operates at a maximum supply voltage of 5.5V volts.A minimum supply voltage of 4.5V is required for this device to operate.There is 5V power supply available for it.A total of 516Programmable I/Os are present.The maximal frequency should be lower than 100MHz.
M4A5-32/32-10VI48 Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
48 pin count
48 pins
5V power supplies
M4A5-32/32-10VI48 Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-10VI48 CPLDs applications.
- High speed graphics processing
- Discrete logic functions
- Software-driven hardware configuration
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- DDC INTERFACE
- Address decoders
- LED Lighting systems
- POWER-SAVING MODES
- Reset swapping
- Auxiliary Power Supply Isolated and Non-isolated
