M4A5-32/32-10VNI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 1250 |
| Max Frequency | 100MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-32/32-10VNI Overview
32macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is embedded in the 44-TQFP package.It is equipped with 32I/O ports.The termination of a device is set to [0].There is a QUADterminal position on the electrical part in question.The device is powered by a voltage of 5V volts.This part is included in Programmable Logic Devices.It is packaged in the way of Tray.A reliable operation is ensured by the operating temperature of [0].Ideally, the chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.A chip with 44pins is programmed.When using this device, YESis also available.There are related parts in [0].There are 1250 gates, which are devices that acts as a building block for digital circuits. If high efficiency is desired, the supply voltage should be kept at [0].In general, it is recommended to store data in [0].This electronic part is mounted in the way of Surface Mount.The 44pins are designed into the board.A maximum supply voltage of 5.5Vis used in its operation.Normally, it operates with a voltage of 4.5VV as its minimum supply voltage.It runs on 5Vvolts of power.It is recommended that the maximal frequency be lower than 100MHz.
M4A5-32/32-10VNI Features
44-TQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pin count
44 pins
5V power supplies
M4A5-32/32-10VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-10VNI CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- D/T registers and latches
- Reset swapping
- State machine control
- Custom shift registers
- Voltage level translation
- Code converters
- PULSE WIDTH MODULATION (PWM)
- Page register
- Timing control
