M4A5-32/32-12VNI48
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Number of Gates | 1250 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-32/32-12VNI48 Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the 48-LQFPpackage, you will find it.The device is programmed with 32 I/O ports.It is programmed to terminate devices at [0].QUADis the terminal position of this electrical part.The power supply voltage is 5V.It is a part of family [0].As a result, it is packaged as Tray.To ensure its reliability, the operating temperature is set to [0].It is recommended to mount the chip by Surface Mount.FPGAs belonging to the ispMACH? 4Aseries contain this type of chip.There are 48 pins on the chip.If you use this device, you will also find [0].According to the M4A5-32, its related parts can be found.As a building block for digital circuits, there are 1250gates.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.It is adopted to store data in [0].Surface Mountis the mounting point of this electronic part.There are 48pins on it.There is a maximum supply voltage of 5.5Vwhen the device is operating.It operates with the minimal supply voltage of 4.5V.There is 5V power supply available for it.A total of 256 Programmable I/Os are available.There should be a lower maximum frequency than 83.3MHz.
M4A5-32/32-12VNI48 Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
48 pin count
48 pins
5V power supplies
M4A5-32/32-12VNI48 Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-12VNI48 CPLDs applications.
- Complex programmable logic devices
- Programmable power management
- ROM patching
- DDC INTERFACE
- Software Configuration of Add-In Boards
- Multiple DIP Switch Replacement
- PULSE WIDTH MODULATION (PWM)
- Discrete logic functions
- Storage Cards and Storage Racks
- Handheld digital devices
