M4A5-32/32-5VC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Gates | 1250 |
| Max Frequency | 167MHz |
| Number of Programmable I/O | 516 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-32/32-5VC Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).You can find it in package [0].In this case, there are 32 I/Os programmed.It is programmed that device terminations will be 44 .This electrical part is wired with a terminal position of QUAD.The power supply voltage is 5V.There is a part included in Programmable Logic Devices.Trayshould be used to package the chip.A reliable operation is ensured by the operating temperature of [0].There should be a Surface Mounton the chip.As part of the ispMACH? 4Aseries, it is a type of FPGA.In this chip, the 44pins are programmed.If this device is used, you will also be able to find [0].M4A5-32contains its related parts.The 1250gates serve as building blocks for digital circuits.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.It is recommended that data be stored in [0].Surface Mountis the mounting point of this electronic part.The 44pins are designed into the board.It operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.A power supply of 5Vvolts is required to operate this device.There are 516 programmable I/Os in this system.The maximum frequency should not exceed 167MHz.
M4A5-32/32-5VC Features
44-TQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
5V power supplies
M4A5-32/32-5VC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-5VC CPLDs applications.
- Custom state machines
- State machine design
- Address decoders
- Software Configuration of Add-In Boards
- Storage Cards and Storage Racks
- Boolean function generators
- Code converters
- Power automation
- I/O PORTS (MCU MODULE)
- Cross-Matrix Switch
