M4A5-32/32-5VNC48
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Gates | 1250 |
| Max Frequency | 167MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-32/32-5VNC48 Overview
32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is packaged with 48-LQFP.The device is programmed with 32 I/O ports.There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.There is 5V voltage supply for this device.This part is in the family [0].Trayshould be used to package the chip.A reliable operation is ensured by the operating temperature of [0].Surface Mountshould be used for mounting the chip.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.A chip with 48pins is programmed.It is also characterized by YES.The M4A5-32can be used to identify its related parts.As a building block for digital circuits, there are 1250gates.If high efficiency is desired, the supply voltage should be kept at [0].In general, it is recommended to store data in [0].The electronic component is mounted by Surface Mount.The device is designed with pins [0].A maximum supply voltage of 5.25Vis used in its operation.Despite its minimal supply voltage of [0], it is capable of operating.This device runs on 5Vvolts of electricity.A total of 256Programmable I/Os are present.Ideally, the maximal frequency should be lower than 167MHz Hz.
M4A5-32/32-5VNC48 Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
48 pin count
48 pins
5V power supplies
M4A5-32/32-5VNC48 Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-5VNC48 CPLDs applications.
- White goods (Washing, Cold, Aircon ,...)
- High speed graphics processing
- Boolean function generators
- PLC analog input modules
- Multiple Clock Source Selection
- Programmable polarity
- D/T registers and latches
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Wide Vin Industrial low power SMPS
- Field programmable gate
