M4A5-32/32-7JNC
| Parameters | |
|---|---|
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 1250 |
| Max Frequency | 182MHz |
| Number of Programmable I/O | 32 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 64 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
M4A5-32/32-7JNC Overview
In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.In the 44-LCC (J-Lead)package, you will find it.The device has 32inputs and outputs.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical component has a terminal position of 0.It is powered by a voltage of 5V volts.There is a part included in Programmable Logic Devices.Ideally, the chip should be packaged by Tube.To ensure reliability, the device operates at a temperature of [0].Chips should be mounted by Surface Mount.In FPGA terms, it is a type of ispMACH? 4Aseries FPGA.In this chip, the 44pins are programmed.When using this device, YESis also available.The M4A5-32shows its related parts.1250gates are used to construct digital circuits.In general, it is recommended to store data in [0].In this case, Surface Mountis used to mount the electronic component.The 64pins are designed into the board.With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.A power supply of 5Vis required to operate it.A total of 32Programmable I/Os are present.182MHzis the maximum frequency.
M4A5-32/32-7JNC Features
44-LCC (J-Lead) package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
64 pins
5V power supplies
M4A5-32/32-7JNC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-7JNC CPLDs applications.
- Code converters
- Complex programmable logic devices
- Preset swapping
- Software Configuration of Add-In Boards
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Programmable polarity
- Dedicated input registers
- Multiple Clock Source Selection
- D/T registers and latches
- Protection relays
