M4A5-32/32-7VI48
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 1250 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-32/32-7VI48 Overview
A mobile phone network consists of 32macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).48-LQFPis the package in which it resides.There are 32 I/Os programmed in it.It is programmed that device terminations will be 48 .The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The device is powered by a voltage of 5V volts.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].Chips should be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4A series.It is equipped with 48 pin count.If you use this device, you will also find [0].According to the M4A5-32, its related parts can be found.In digital circuits, there are 1250gates, which act as a basic building block.High efficiency requires the supply voltage to be maintained at [0].Data is stored using [0].The electronic part is mounted by Surface Mount.There are 48 pins on the device.A maximum voltage of 5.5Vis required for operation.A minimum supply voltage of 4.5V is required for this device to operate.Currently, it is powered by 5Vsources.A total of 256 Programmable I/Os are available.It is recommended that the maximal frequency be lower than 125MHz.
M4A5-32/32-7VI48 Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
48 pin count
48 pins
5V power supplies
M4A5-32/32-7VI48 Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-7VI48 CPLDs applications.
- TIMERS/COUNTERS
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Storage Cards and Storage Racks
- State machine control
- Handheld digital devices
- White goods (Washing, Cold, Aircon ,...)
- State machine design
- ROM patching
- Discrete logic functions
- Parity generators
