M4A5-32/32-7VNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 1250 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 516 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-32/32-7VNC Overview
There are 32 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.44-TQFPis the package in which it resides.The device is programmed with 32 I/O ports.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The power supply voltage is 5V.The part is included in Programmable Logic Devices.Package the chip by Tray.During operation, the operating temperature is kept at 0°C~70°C TA to ensure its reliability.Surface Mountshould be used for mounting the chip.It belongs to the ispMACH? 4Aseries of FPGAs.The chip is programmed with 44 pins.When using this device, YEScan also be found.The M4A5-32indicates that its related parts can be found.It is possible to construct digital circuits using 1250gates, which are devices that serve as building blocks.In order to maintain high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].The electronic component is mounted by Surface Mount.It is designed with 44 pins.This device operates at a voltage of 5.25Vas its maximum supply voltage.It operates with the minimal supply voltage of 4.75V.The system runs on a power supply of 5V watts.There are 516 Programmable I/Os.The maximum frequency should not exceed 125MHz.
M4A5-32/32-7VNC Features
44-TQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
5V power supplies
M4A5-32/32-7VNC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-7VNC CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- High speed graphics processing
- Interface bridging
- ON-CHIP OSCILLATOR CIRCUIT
- Address decoders
- Software-driven hardware configuration
- Synchronous or asynchronous mode
- Dedicated input registers
- Voltage level translation
- Power up sequencing
