M4A5-32/32-7VNI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 1250 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-32/32-7VNI Overview
Currently, there are 32 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is contained in package [0].The device is programmed with 32 I/Os.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical component has a terminal position of 0.The device is powered by a voltage of 5V volts.The part belongs to Programmable Logic Devices family.It is recommended that the chip be packaged by Tray.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.There should be a Surface Mounton the chip.The FPGA belongs to the ispMACH? 4A series.It is equipped with 44 pin count.It is also characterized by YES.You can find its related parts in the [0].1250gates are devices that serve as building blocks for digital circuits.If high efficiency is desired, the supply voltage should be kept at [0].In order to store data, EEPROMis used.In this case, it is mounted by Surface Mount.44pins are included in its design.There is a maximum supply voltage of 5.5Vwhen the device is operating.In order for it to operate, a supply voltage of 4.5Vis required.There is 5V power supply available for it.A programmable I/O count of 256 has been recorded.It is recommended that the maximal frequency be lower than 125MHz.
M4A5-32/32-7VNI Features
44-TQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pin count
44 pins
5V power supplies
M4A5-32/32-7VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-7VNI CPLDs applications.
- Boolean function generators
- Pattern recognition
- State machine control
- PLC analog input modules
- Digital systems
- Address decoders
- STANDARD SERIAL INTERFACE UART
- I/O expansion
- Complex programmable logic devices
- Custom state machines
