M4A5-32/32-7VNI48
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 1250 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 516 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-32/32-7VNI48 Overview
There are 32 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.You can find it in package [0].As you can see, this device has 32 I/O ports programmed into it.The termination of a device is set to [0].The terminal position of this electrical component is QUAD.Power is provided by a supply voltage of 5V volts.This part is in the family [0].It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.It is recommended to mount the chip by Surface Mount.The ispMACH? 4Aseries comprises this type of FPGA.It is programmed with 48 pins.If you use this device, you will also find [0].The M4A5-32shows its related parts.As a building block for digital circuits, there are 1250gates.In order to maintain high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].A Surface Mountis mounted on this electronic component.The 48pins are designed into the board.With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.It runs on 5Vvolts of power.Currently, there are 516 Programmable I/Os available.The maximum frequency should not exceed 125MHz.
M4A5-32/32-7VNI48 Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
48 pin count
48 pins
5V power supplies
M4A5-32/32-7VNI48 Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-7VNI48 CPLDs applications.
- Synchronous or asynchronous mode
- Digital systems
- Address decoders
- Auxiliary Power Supply Isolated and Non-isolated
- DMA control
- Reset swapping
- Portable digital devices
- TIMERS/COUNTERS
- Boolean function generators
- Battery operated portable devices
