M4A5-64/32-10VI48
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-64 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 2500 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 516 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-64/32-10VI48 Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).There is a 48-LQFP package containing it.It is programmed with 32 I/Os.There is a 48terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power supply voltage is 5V.This part is included in Programmable Logic Devices.The chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4A series.Chips are programmed with 48 pins.When using this device, YESis also available.According to the M4A5-64, its related parts can be found.2500gates are devices that serve as building blocks for digital circuits.If high efficiency is desired, the supply voltage should be kept at [0].Data is stored using [0].The electronic component is mounted by Surface Mount.There are 48 pins on the device.This device operates at a voltage of 5.5Vas its maximum supply voltage.Initially, it requires a voltage of 4.5Vas the minimum supply voltage.It operates from 5V power supplies.A total of 516Programmable I/Os are present.The maximal frequency should be lower than 100MHz.
M4A5-64/32-10VI48 Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
48 pin count
48 pins
5V power supplies
M4A5-64/32-10VI48 Applications
There are a lot of Lattice Semiconductor Corporation M4A5-64/32-10VI48 CPLDs applications.
- Address decoding
- Random logic replacement
- DDC INTERFACE
- Power automation
- INTERRUPT SYSTEM
- Voltage level translation
- Multiple Clock Source Selection
- PULSE WIDTH MODULATION (PWM)
- Software-Driven Hardware Configuration
- White goods (Washing, Cold, Aircon ,...)
