M4A5-64/32-10VNC
| Parameters | |
|---|---|
| Max Junction Temperature (Tj) | 130°C |
| Voltage Supply - Internal | 4.75V~5.25V |
| Ambient Temperature Range High | 70°C |
| Height | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-64 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | CMOS |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 2500 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
M4A5-64/32-10VNC Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is packaged with 44-TQFP.There are 32 I/Os on the board.44terminations are programmed into the device.Its terminal position is QUAD.A voltage of 5V is used as the power supply for this device.There is a part included in Programmable Logic Devices.Package the chip by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.It is mounted in the way of Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.With 44pins programmed, the chip is ready to use.When using this device, YEScan also be found.The M4A5-64indicates that its related parts can be found.It is possible to construct digital circuits using 2500gates, which are devices that serve as building blocks.The supply voltage should be maintained at 5V for high efficiency.In general, it is recommended to store data in [0].Surface Mountmounts this electronic component.There are 44pins on it.There is a maximum supply voltage of 5.25Vwhen the device is operating.A minimum supply voltage of 4.75V is required for this device to operate.A power supply of 5Vvolts is required to operate this device.This frequency is 100MHz.
M4A5-64/32-10VNC Features
44-TQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
5V power supplies
M4A5-64/32-10VNC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-64/32-10VNC CPLDs applications.
- USB Bus
- Digital designs
- I/O PORTS (MCU MODULE)
- Random logic replacement
- Digital multiplexers
- Address decoding
- Field programmable gate
- I/O expansion
- Complex programmable logic devices
- Timing control
