M4A5-64/32-10VNI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-64 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 2500 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-64/32-10VNI Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the 44-TQFPpackage, you will find it.It is programmed with 32 I/Os.There are 44 terminations programmed into the device.QUADis the terminal position of this electrical part.The power source is powered by 5Vvolts.It is a part of family [0].Package the chip by Tray.A reliable operation is ensured by the operating temperature of [0].Chips should be mounted by Surface Mount.This type of FPGA is a part of the ispMACH? 4A series.In this chip, the 44pins are programmed.When using this device, YESis also available.In accordance with the [0], its related parts are listed.The 2500gates serve as building blocks for digital circuits.In order to maintain high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.Surface Mountis the mounting point of this electronic part.A total of 44pins are provided on this board.A maximum voltage of 5.5Vis required for operation.Initially, it requires a voltage of 4.5Vas the minimum supply voltage.A power supply of 5Vvolts is required to operate this device.A total of 256Programmable I/Os are present.It is recommended not to exceed 100MHzin terms of frequency.
M4A5-64/32-10VNI Features
44-TQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pin count
44 pins
5V power supplies
M4A5-64/32-10VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-64/32-10VNI CPLDs applications.
- Multiple Clock Source Selection
- Timing control
- TIMERS/COUNTERS
- Pattern recognition
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- D/T registers and latches
- LED Lighting systems
- DDC INTERFACE
- Digital multiplexers
- Bootloaders for FPGAs
