M4A5-64/32-12VNI48
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-64 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Number of Gates | 2500 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-64/32-12VNI48 Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The product is contained in a 48-LQFP package.The device is programmed with 32 I/O ports.It is programmed that device terminations will be 48 .This electrical part is wired with a terminal position of QUAD.Power is supplied by a voltage of 5V volts.There is a part in the family [0].It is recommended to package the chip by Tray.The operating temperature of the machine is -40°C~85°C TA to ensure its reliability.It is recommended that Surface Mountholds the chip in place.As part of the ispMACH? 4Aseries, it is a type of FPGA.In this chip, the 48pins are programmed.This device is also capable of displaying [0].The M4A5-64shows its related parts.A digital circuit is built using 2500gates.If high efficiency is to be achieved, the supply voltage should be maintained at [0].Data storage is performed using [0].Surface Mountis the mounting point of this electronic part.There are 48 pins embedded in the device.It operates with the maximal supply voltage of 5.5V.A minimum supply voltage of 4.5V is required for this device to operate.This device runs on 5Vvolts of electricity.Programmable I/Os are counted up 256.Ideally, the maximal frequency should be lower than 83.3MHz Hz.
M4A5-64/32-12VNI48 Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
48 pin count
48 pins
5V power supplies
M4A5-64/32-12VNI48 Applications
There are a lot of Lattice Semiconductor Corporation M4A5-64/32-12VNI48 CPLDs applications.
- High speed graphics processing
- State machine control
- Discrete logic functions
- Portable digital devices
- Interface bridging
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Software-driven hardware configuration
- Software Configuration of Add-In Boards
- Storage Cards and Storage Racks
- Bootloaders for FPGAs
