M4A5-64/32-55VC48
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-64 |
| Pin Count | 48 |
| JESD-30 Code | S-PQFP-G48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 5.5 ns |
| Number of Gates | 2500 |
| Max Frequency | 167MHz |
| Number of Programmable I/O | 516 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 5.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-64/32-55VC48 Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is enclosed in a 48-LQFP package.This device has 32 I/O ports programmed into it.48terminations have been programmed into the device.QUADis the terminal position of this electrical part.The device is powered by a voltage of 5V volts.There is a part in the family [0].It is packaged in the way of Tray.Ensure its reliability by operating at [0].Mount the chip by Surface Mount.It belongs to the ispMACH? 4Aseries of FPGAs.48pins are programmed on the chip.It is also possible to find YESwhen using this device.There are related parts in [0].It is possible to construct digital circuits using 2500gates, which are devices that serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].In this case, the maximum supply voltage is 5.25V.With a minimal supply voltage of [0], it operates.A power supply of 5Vis required to operate it.A total of 516programmable I/Os are available.The maximal frequency should be lower than 167MHz.
M4A5-64/32-55VC48 Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
48 pin count
5V power supplies
M4A5-64/32-55VC48 Applications
There are a lot of Lattice Semiconductor Corporation M4A5-64/32-55VC48 CPLDs applications.
- High speed graphics processing
- Cross-Matrix Switch
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Configurable Addressing of I/O Boards
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- State machine design
- Handheld digital devices
- Preset swapping
- Pattern recognition
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
