M4A5-64/32-55VNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-64 |
| Pin Count | 44 |
| JESD-30 Code | S-PQFP-G44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 5.5 ns |
| Number of Gates | 2500 |
| Max Frequency | 167MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 5.5ns |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-64/32-55VNC Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.There is a 44-TQFP package containing it.The device is programmed with 32 I/Os.44terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.It is powered from a supply voltage of 5V.This part is included in Programmable Logic Devices.Trayshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].Chips should be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4A series.There are 44 pins on the chip.This device can also display [0].You can find its related parts in the [0].There are 2500 gates, which are devices that acts as a building block for digital circuits. Optimal efficiency requires a supply voltage of [0].In order to store data, EEPROMis used.There is a maximum supply voltage of 5.25Vwhen the device is operating.With a minimal supply voltage of [0], it operates.A total of 5V power supplies are needed to run it.A total of 256Programmable I/Os are present.The maximal frequency should be lower than 167MHz.
M4A5-64/32-55VNC Features
44-TQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
5V power supplies
M4A5-64/32-55VNC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-64/32-55VNC CPLDs applications.
- STANDARD SERIAL INTERFACE UART
- Software Configuration of Add-In Boards
- Pattern recognition
- Parity generators
- ToR/Aggregation/Core Switch and Router
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Digital multiplexers
- Synchronous or asynchronous mode
- Multiple DIP Switch Replacement
- Code converters
