M4A5-64/32-55VNC48
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-64 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 5.5 ns |
| Number of Gates | 2500 |
| Max Frequency | 167MHz |
| Number of Programmable I/O | 516 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
M4A5-64/32-55VNC48 Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is part of the 48-LQFP package.It is equipped with 32I/O ports.There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical component is QUAD.The power source is powered by 5Vvolts.There is a part in the family [0].Trayshould be used for packaging the chip.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.Ensure that the chip is mounted by Surface Mount.FPGAs belonging to the ispMACH? 4Aseries contain this type of chip.Chips are programmed with 48 pins.If you use this device, you will also find [0].There are related parts in [0].As a building block for digital circuits, there are 2500gates.Optimal efficiency requires a supply voltage of [0].It is recommended to store data in [0].The electronic part is mounted by Surface Mount.There are 48 pins embedded in the device.A maximum supply voltage of 5.25Vis used in its operation.The device is designed to operate with a minimal supply voltage of 4.75VV.A total of 5V power supplies are needed to run it.A total of 516 Programmable I/Os are available.The maximum frequency should not exceed 167MHz.
M4A5-64/32-55VNC48 Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
48 pin count
48 pins
5V power supplies
M4A5-64/32-55VNC48 Applications
There are a lot of Lattice Semiconductor Corporation M4A5-64/32-55VNC48 CPLDs applications.
- Dedicated input registers
- Battery operated portable devices
- Software-driven hardware configuration
- Boolean function generators
- Address decoding
- Pattern recognition
- I2C BUS INTERFACE
- Power automation
- Wide Vin Industrial low power SMPS
- LED Lighting systems
