M4A5-64/32-7JI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Supplier Device Package | 44-PLCC (16.58x16.58) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | ispMACH® 4A |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | M4A5-64 |
| Operating Supply Voltage | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 2500 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 256 |
| Number of Macro Cells | 64 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 7.5ns |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-64/32-7JI Overview
There are 64 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is part of the 44-LCC (J-Lead) package.As you can see, this device has 32 I/O ports programmed into it.Ideally, the chip should be packaged by Tube.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.Chips should be mounted by Surface Mount.This type of FPGA is a part of the ispMACH? 4A series.The M4A5-64can be used to identify its related parts.In digital circuits, there are 2500gates, which act as a basic building block.In order to maintain high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].Surface Mountmounts this electronic component.This board has 44 pins.This device operates at a voltage of 5.5Vas its maximum supply voltage.The device is designed to operate with a minimal supply voltage of 4.5VV.There are 256 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. Ideally, the maximal frequency should be lower than 125MHz Hz.In order to operate properly, the operating temperature should be higher than -40°C.A temperature lower than 85°Cis recommended for operation.
M4A5-64/32-7JI Features
44-LCC (J-Lead) package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pins
M4A5-64/32-7JI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-64/32-7JI CPLDs applications.
- D/T registers and latches
- Programmable polarity
- Cross-Matrix Switch
- White goods (Washing, Cold, Aircon ,...)
- PULSE WIDTH MODULATION (PWM)
- Custom state machines
- Digital designs
- Complex programmable logic devices
- Power up sequencing
- Software-driven hardware configuration
