M4A5-64/32-7VI48
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-64 |
| Pin Count | 48 |
| JESD-30 Code | S-PQFP-G48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 2500 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 516 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-64/32-7VI48 Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).In the 48-LQFPpackage, you will find it.There are 32 I/Os programmed in it.The termination of a device is set to [0].There is a QUADterminal position on the electrical part in question.The power supply voltage is 5V.It is a part of the family [0].Trayshould be used for packaging the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Surface Mountshould be used for mounting the chip.The ispMACH? 4Aseries comprises this type of FPGA.There are 48 pins on the chip.This device also displays [0].The M4A5-64contains its related parts.In digital circuits, there are 2500gates, which act as a basic building block.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].With a maximum supply voltage of [0], it operates.A minimum supply voltage of 4.5V is required for it to operate.A total of 5V power supplies are needed to run it.A total of 516 Programmable I/Os are available.Ideally, the maximal frequency should be lower than 125MHz Hz.
M4A5-64/32-7VI48 Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
48 pin count
5V power supplies
M4A5-64/32-7VI48 Applications
There are a lot of Lattice Semiconductor Corporation M4A5-64/32-7VI48 CPLDs applications.
- Programmable power management
- State machine control
- I/O expansion
- ROM patching
- Wide Vin Industrial low power SMPS
- PLC analog input modules
- Multiple DIP Switch Replacement
- D/T registers and latches
- Protection relays
- Configurable Addressing of I/O Boards
