M4A5-64/32-7VNC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-64 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 2500 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 900 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-64/32-7VNC Overview
There are 64 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is contained in package [0].It is equipped with 32I/O ports.It is programmed that device terminations will be 44 .The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.A voltage of 5V is used as the power supply for this device.It is a part of family [0].Trayshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].It is recommended that the chip be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4A series.Chips are programmed with 44 pins.Additionally, this device is capable of displaying [0].M4A5-64contains its related parts.2500gates are devices that serve as building blocks for digital circuits.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].The electronic part is mounted by Surface Mount.This board has 44 pins.There is a maximum supply voltage of 5.25Vwhen the device is operating.The device is designed to operate with a minimal supply voltage of 4.75VV.It runs on 5Vvolts of power.There are a total of 900 Programmable I/Os.It is recommended that the maximum frequency be less than 125MHz.
M4A5-64/32-7VNC Features
44-TQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
5V power supplies
M4A5-64/32-7VNC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-64/32-7VNC CPLDs applications.
- Handheld digital devices
- Interface bridging
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Address decoding
- Address decoders
- I2C BUS INTERFACE
- Discrete logic functions
- PULSE WIDTH MODULATION (PWM)
- Software Configuration of Add-In Boards
- Cross-Matrix Switch
