M4A5-64/32-7VNI
| Parameters | |
|---|---|
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-64 |
| Pin Count | 44 |
| JESD-30 Code | S-PQFP-G44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 2500 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 900 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
M4A5-64/32-7VNI Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is enclosed in a 44-TQFP package.As a result, it has 32 I/O ports programmed.It is programmed to terminate devices at [0].QUADis the terminal position of this electrical part.Power is supplied by a voltage of 5V volts.This part is included in Programmable Logic Devices.Trayis the packaging method.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.It is recommended that Surface Mountholds the chip in place.FPGAs belonging to the ispMACH? 4Aseries contain this type of chip.It is equipped with 44 pin count.If this device is used, you will also be able to find [0].The M4A5-64indicates that its related parts can be found.2500gates are devices that serve as building blocks for digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].A voltage of 5.5V is the maximum supply voltage for this device.With a minimal supply voltage of [0], it operates.This device runs on 5Vvolts of electricity.Programmable I/Os are counted up 900.It is recommended that the maximal frequency be lower than 125MHz.
M4A5-64/32-7VNI Features
44-TQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pin count
5V power supplies
M4A5-64/32-7VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-64/32-7VNI CPLDs applications.
- Custom shift registers
- Power up sequencing
- Configurable Addressing of I/O Boards
- Power automation
- Portable digital devices
- PLC analog input modules
- Digital multiplexers
- Auxiliary Power Supply Isolated and Non-isolated
- DMA control
- POWER-SAVING MODES
