M4A5-96/48-10VC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-96 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 48 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 3750 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 900 |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-96/48-10VC Overview
In the mobile phone network, there are 96macro cells, which are cells with high-power antennas and towers.100-LQFPis the package in which it resides.The device is programmed with 48 I/O ports.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.A voltage of 5V is used as the power supply for this device.This part is included in Programmable Logic Devices.Trayshould be used for packaging the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is mounted in the way of Surface Mount.It belongs to the ispMACH? 4Aseries of FPGAs.It is also possible to find YESwhen using this device.M4A5-96contains its related parts.There are 3750 gates, which are devices that acts as a building block for digital circuits. In order to maintain high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].The electronic part is mounted by Surface Mount.The 100pins are designed into the board.It operates at a maximum supply voltage of 5.25V volts.Despite its minimal supply voltage of [0], it is capable of operating.A power supply of 5Vvolts is required to operate this device.A total of 900Programmable I/Os are present.It is recommended not to exceed 100MHzin terms of frequency.The status of input signals is detected by 4dedicated inputs.
M4A5-96/48-10VC Features
100-LQFP package
48 I/Os
The operating temperature of 0°C~70°C TA
100 pins
5V power supplies
M4A5-96/48-10VC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-96/48-10VC CPLDs applications.
- Digital designs
- Power automation
- Multiple Clock Source Selection
- LED Lighting systems
- Page register
- Configurable Addressing of I/O Boards
- Software-driven hardware configuration
- Bootloaders for FPGAs
- Digital systems
- Digital multiplexers
