M4A5-96/48-10VNI
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M4A5-96 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 48 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 3750 |
| Max Frequency | 182MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
M4A5-96/48-10VNI Overview
There are 96 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is packaged with 100-LQFP.In this case, there are 48 I/Os programmed.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 5V is used as the power supply for this device.This part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.Surface Mountshould be used for mounting the chip.As part of the ispMACH? 4Aseries, it is a type of FPGA.In this chip, the 100pins are programmed.Additionally, this device is capable of displaying [0].The M4A5-96can be used to identify its related parts.It is possible to construct digital circuits using 3750gates, which are devices that serve as building blocks.For data storage, EEPROMis adopted.In this case, it is mounted by Surface Mount.The 100pins are designed into the board.It operates at a maximum supply voltage of 5.5V volts.A minimum supply voltage of 4.5V is required for it to operate.In order for the device to operate, it requires 5V power supplies.It is recommended that the maximum frequency be less than 182MHz.Input signals are detected by 4dedicated inputs.
M4A5-96/48-10VNI Features
100-LQFP package
48 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
5V power supplies
M4A5-96/48-10VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-96/48-10VNI CPLDs applications.
- Digital systems
- POWER-SAVING MODES
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Bootloaders for FPGAs
- Handheld digital devices
- Auxiliary Power Supply Isolated and Non-isolated
- Battery operated portable devices
- Protection relays
- STANDARD SERIAL INTERFACE UART
- Code converters
