M4A5-96/48-12VNI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M4A5-96 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 48 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Number of Gates | 3750 |
| Max Frequency | 182MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-96/48-12VNI Overview
There are 96 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.100-LQFPis the package in which it resides.As a result, it has 48 I/O ports programmed.The termination of a device is set to [0].The terminal position of this electrical component is QUAD.It is powered from a supply voltage of 5V.This part is part of the family [0].The chip should be packaged by Tray.The operating temperature of the machine is -40°C~85°C TA to ensure its reliability.It is recommended to mount the chip by Surface Mount.The ispMACH? 4Aseries FPGA is one of these types.100pins are programmed on the chip.It is also possible to find YESwhen using this device.In accordance with the [0], its related parts are listed.In digital circuits, there are 3750gates, which act as a basic building block.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.It is adopted to store data in [0].In this case, Surface Mountis used to mount the electronic component.The 100pins are designed into the board.There is a maximum supply voltage of 5.5V.A minimum supply voltage of 4.5V is required for it to operate.It runs on a voltage of 5Vvolts.It is recommended that the maximal frequency be lower than 182MHz.Input signals are detected by 4dedicated inputs.
M4A5-96/48-12VNI Features
100-LQFP package
48 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
5V power supplies
M4A5-96/48-12VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-96/48-12VNI CPLDs applications.
- Battery operated portable devices
- State machine design
- INTERRUPT SYSTEM
- Complex programmable logic devices
- Auxiliary Power Supply Isolated and Non-isolated
- Address decoders
- Synchronous or asynchronous mode
- High speed graphics processing
- ROM patching
- Digital systems
