M4A5-96/48-55VNC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M4A5-96 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 48 |
| Memory Type | EEPROM |
| Propagation Delay | 5.5 ns |
| Number of Gates | 3750 |
| Max Frequency | 182MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 5.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-96/48-55VNC Overview
96 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is contained in package [0].There are 48 I/Os on the board.Devices are programmed with terminations of [0].This electrical part is wired with a terminal position of QUAD.Power is supplied by a voltage of 5V volts.It is included in Programmable Logic Devices.It is recommended to package the chip by Tray.A reliable operation is ensured by the operating temperature of [0].Ensure that the chip is mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4A series.Chips are programmed with 100 pins.If this device is used, you will also be able to find [0].The M4A5-96indicates that its related parts can be found.3750gates are used to construct digital circuits.Data storage is performed using [0].There is a maximum supply voltage of 5.25V.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.A total of 5V power supplies are needed to run it.There should be a lower maximum frequency than 182MHz.It has 4dedicated inputs for detecting input signals.
M4A5-96/48-55VNC Features
100-LQFP package
48 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
5V power supplies
M4A5-96/48-55VNC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-96/48-55VNC CPLDs applications.
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- State machine control
- Configurable Addressing of I/O Boards
- PLC analog input modules
- Wide Vin Industrial low power SMPS
- USB Bus
- Cross-Matrix Switch
- Code converters
- Digital multiplexers
- POWER-SAVING MODES
