M5-128/120-15YC/1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 160-BQFP |
| Number of Pins | 160 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-128 |
| Pin Count | 160 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Number of Gates | 5000 |
| Max Frequency | 83.3MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
M5-128/120-15YC/1 Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is packaged with 160-BQFP.There are 120 I/Os programmed in it.There are 160 terminations programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.There is 5V voltage supply for this device.This part is included in Programmable Logic Devices.Trayshould be used to package the chip.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.There should be a Surface Mounton the chip.The FPGA belongs to the MACH? 5 series.In this chip, the 160pins are programmed.This device also displays [0].Its related parts can be found in the [0].In digital circuits, 5000gates serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.In this case, it is mounted by Surface Mount.It is designed with 160 pins.This device operates at a voltage of 5.25Vas its maximum supply voltage.It operates with the minimal supply voltage of 4.75V.This device runs on 5Vvolts of electricity.It is recommended not to exceed 83.3MHzin terms of frequency.
M5-128/120-15YC/1 Features
160-BQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
160 pin count
160 pins
5V power supplies
M5-128/120-15YC/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-128/120-15YC/1 CPLDs applications.
- Discrete logic functions
- DMA control
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- State machine design
- Voltage level translation
- Preset swapping
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- I/O expansion
- Software Configuration of Add-In Boards
- Software-driven hardware configuration
