M5-128/120-20YI/1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 160-BQFP |
| Number of Pins | 160 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-128 |
| Pin Count | 160 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 20 ns |
| Number of Gates | 5000 |
| Max Frequency | 83.3MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M5-128/120-20YI/1 Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The item is enclosed in a 160-BQFP package.There are 120 I/Os programmed in it.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 5V is used as the power supply for this device.The part is included in Programmable Logic Devices.Trayshould be used to package the chip.Ensure its reliability by operating at [0].Ensure that the chip is mounted by Surface Mount.The MACH? 5series FPGA is one of these types.The chip is programmed with 160 pins.It is also possible to find YESwhen using this device.You can find its related parts in the [0].The 5000gates serve as building blocks for digital circuits.For storing data, it is recommended to use [0].In this case, Surface Mountis used to mount the electronic component.The device is designed with pins [0].There is a maximum supply voltage of 5.5V.The device is designed to operate with a minimal supply voltage of 4.5VV.The system runs on a power supply of 5V watts.It is recommended not to exceed 83.3MHzin terms of frequency.
M5-128/120-20YI/1 Features
160-BQFP package
120 I/Os
The operating temperature of -40°C~85°C TA
160 pin count
160 pins
5V power supplies
M5-128/120-20YI/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-128/120-20YI/1 CPLDs applications.
- POWER-SAVING MODES
- I/O PORTS (MCU MODULE)
- Portable digital devices
- Cross-Matrix Switch
- TIMERS/COUNTERS
- Software-Driven Hardware Configuration
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Discrete logic functions
- Reset swapping
- USB Bus
