M5-128/68-10YC/1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-128 |
| Pin Count | 100 |
| JESD-30 Code | R-PQFP-G100 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 5000 |
| Max Frequency | 125MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Height Seated (Max) | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
M5-128/68-10YC/1 Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).There is a 100-BQFP package containing it.As a result, it has 68 I/O ports programmed.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical component has a terminal position of 0.The power supply voltage is 5V.It is a part of the family [0].It is recommended that the chip be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].Mount the chip by Surface Mount.FPGAs belonging to the MACH? 5series contain this type of chip.It is programmed with 100 pins.When using this device, YEScan also be found.You can find its related parts in the [0].In digital circuits, there are 5000gates, which act as a basic building block.EEPROM is adopted for storing data.With a maximum supply voltage of [0], it operates.It is powered by 4.75Vas its minimum supply voltage.A total of 5V power supplies are needed to run it.It is recommended that the maximal frequency be lower than 125MHz.
M5-128/68-10YC/1 Features
100-BQFP package
68 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
5V power supplies
M5-128/68-10YC/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-128/68-10YC/1 CPLDs applications.
- Software Configuration of Add-In Boards
- Address decoders
- DMA control
- Reset swapping
- Timing control
- STANDARD SERIAL INTERFACE UART
- ROM patching
- I2C BUS INTERFACE
- Storage Cards and Storage Racks
- PULSE WIDTH MODULATION (PWM)
