M5-128/68-15YC/1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-128 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Number of Gates | 5000 |
| Max Frequency | 83.3MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
M5-128/68-15YC/1 Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is packaged with 100-BQFP.It is equipped with 68I/O ports.There are 100 terminations programmed into the device.There is a QUADterminal position on the electrical part in question.A voltage of 5V is used as the power supply for this device.This part is in the family [0].Trayis the packaging method.Due to its reliability, it is operated at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.The FPGA belongs to the MACH? 5 series.A chip with 100pins is programmed.It is also possible to find YESwhen using this device.You can find its related parts in the [0].There are 5000 gates, which are devices that acts as a building block for digital circuits. Optimal efficiency requires a supply voltage of [0].It is recommended to store data in [0].The electronic component is mounted by Surface Mount.A total of 100pins are provided on this board.With a maximum supply voltage of [0], it operates.In order for it to operate, a supply voltage of 4.75Vis required.A power supply of 5Vvolts is required to operate this device.It is recommended that the maximal frequency be lower than 83.3MHz.
M5-128/68-15YC/1 Features
100-BQFP package
68 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
5V power supplies
M5-128/68-15YC/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-128/68-15YC/1 CPLDs applications.
- Parity generators
- Power up sequencing
- Address decoders
- White goods (Washing, Cold, Aircon ,...)
- ON-CHIP OSCILLATOR CIRCUIT
- STANDARD SERIAL INTERFACE UART
- Digital multiplexers
- Bootloaders for FPGAs
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- D/T registers and latches
