M5-128/68-7YC/1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-128 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 5000 |
| Max Frequency | 167MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
M5-128/68-7YC/1 Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).In the 100-BQFPpackage, you will find it.There are 68 I/Os programmed in it.There are 100 terminations programmed into the device.The terminal position of this electrical component is QUAD.The power source is powered by 5Vvolts.There is a part included in Programmable Logic Devices.Trayshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].Ideally, the chip should be mounted by Surface Mount.The MACH? 5series comprises this type of FPGA.100pins are programmed on the chip.This device is also capable of displaying [0].The M5-128indicates that related parts can be found.5000gates are used to construct digital circuits.High efficiency requires the supply voltage to be maintained at [0].In order to store data, EEPROMis used.Surface Mountmounts this electronic component.A total of 100pins are provided on this board.It operates at a maximum supply voltage of 5.25V volts.With a minimal supply voltage of [0], it operates.It operates from 5V power supplies.There should be a lower maximum frequency than 167MHz.
M5-128/68-7YC/1 Features
100-BQFP package
68 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
5V power supplies
M5-128/68-7YC/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-128/68-7YC/1 CPLDs applications.
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Address decoding
- Cross-Matrix Switch
- DDC INTERFACE
- Dedicated input registers
- LED Lighting systems
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Page register
- PULSE WIDTH MODULATION (PWM)
