banner_page

M5-192/120-12YC/1

5V 0.65mm PMIC MACH? 5 Series M5-192 5V 160-BQFP


  • Manufacturer: Lattice Semiconductor Corporation
  • Nocochips NO: 477-M5-192/120-12YC/1
  • Package: 160-BQFP
  • Datasheet: PDF
  • Stock: 735
  • Description: 5V 0.65mm PMIC MACH? 5 Series M5-192 5V 160-BQFP (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 160-BQFP
Surface Mount YES
Operating Temperature 0°C~70°C TA
Packaging Tray
Published 1995
Series MACH® 5
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 160
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Additional Feature YES
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 225
Supply Voltage 5V
Terminal Pitch 0.65mm
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number M5-192
Pin Count 160
JESD-30 Code S-PQFP-G160
Qualification Status Not Qualified
Power Supplies 5V
Programmable Type In System Programmable
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Number of I/O 120
Memory Type EEPROM
Propagation Delay 12 ns
Number of Gates 7500
Max Frequency 100MHz
Output Function MACROCELL
Number of Macro Cells 192
JTAG BST YES
Voltage Supply - Internal 4.75V~5.25V
Delay Time tpd(1) Max 12ns
Height Seated (Max) 4.1mm
Length 28mm
Width 28mm
RoHS Status Non-RoHS Compliant

M5-192/120-12YC/1 Overview


This network has 192macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).In the 160-BQFPpackage, you will find it.It is programmed with 120 I/Os.The termination of a device is set to [0].This electrical part is wired with a terminal position of QUAD.It is powered by a voltage of 5V volts.This part is in the family [0].Ideally, the chip should be packaged by Tray.The operating temperature of the machine is 0°C~70°C TA to ensure its reliability.The chip should be mounted by Surface Mount.The FPGA belongs to the MACH? 5 series.160pins are programmed on the chip.If this device is used, you will also be able to find [0].The M5-192can be used to identify its related parts.A digital circuit can be constructed using 7500gates.For storing data, it is recommended to use [0].In this case, the maximum supply voltage is 5.25V.It operates with the minimal supply voltage of 4.75V.In order for the device to operate, it requires 5V power supplies.There should be a lower maximum frequency than 100MHz.

M5-192/120-12YC/1 Features


160-BQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
160 pin count
5V power supplies

M5-192/120-12YC/1 Applications


There are a lot of Lattice Semiconductor Corporation M5-192/120-12YC/1 CPLDs applications.

  • Reset swapping
  • Page register
  • Software-driven hardware configuration
  • Address decoding
  • D/T registers and latches
  • Digital designs
  • POWER-SAVING MODES
  • Pattern recognition
  • DMA control
  • Configurable Addressing of I/O Boards

Write a review

Note: HTML is not translated!
    Bad           Good