M5-192/120-12YI/1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 160-BQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-192 |
| Pin Count | 160 |
| JESD-30 Code | S-PQFP-G160 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Gates | 7500 |
| Max Frequency | 100MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 12ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M5-192/120-12YI/1 Overview
There are 192 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is enclosed in a 160-BQFP package.This device has 120 I/O ports programmed into it.Devices are programmed with terminations of [0].This electrical component has a terminal position of 0.The device is powered by a voltage of 5V volts.This part is included in Programmable Logic Devices.It is packaged in the way of Tray.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.There should be a Surface Mounton the chip.In this case, it is a type of FPGA belonging to the MACH? 5 series.There are 160 pins on the chip.If this device is used, you will also be able to find [0].The M5-192indicates that its related parts can be found.The 7500gates serve as building blocks for digital circuits.EEPROM is adopted for storing data.A maximum supply voltage of 5.5Vis used in its operation.It operates with the minimal supply voltage of 4.5V.This device runs on 5Vvolts of electricity.The maximum frequency should not exceed 100MHz.
M5-192/120-12YI/1 Features
160-BQFP package
120 I/Os
The operating temperature of -40°C~85°C TA
160 pin count
5V power supplies
M5-192/120-12YI/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-192/120-12YI/1 CPLDs applications.
- POWER-SAVING MODES
- LED Lighting systems
- I/O PORTS (MCU MODULE)
- Auxiliary Power Supply Isolated and Non-isolated
- Multiple DIP Switch Replacement
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- I2C BUS INTERFACE
- Protection relays
- Cross-Matrix Switch
- Digital systems
