M5-192/68-15VC/1
| Parameters | |
|---|---|
| Min Supply Voltage | 4.75V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Number of Gates | 7500 |
| Max Frequency | 83.3MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-192 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
M5-192/68-15VC/1 Overview
There are 192 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).100-LQFPis the package in which it resides.There are 68 I/Os programmed in it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical component is QUAD.It is powered by a voltage of 5V volts.The part is included in Programmable Logic Devices.As a result, it is packaged as Tray.A reliable operation is ensured by the operating temperature of [0].Chips should be mounted by Surface Mount.It belongs to the MACH? 5series of FPGAs.In this chip, the 100pins are programmed.When using this device, YEScan also be found.There are related parts in [0].7500gates are devices that serve as building blocks for digital circuits.The supply voltage should be maintained at 5V for high efficiency.In this case, EEPROMwill be used to store the data.A Surface Mountis mounted on this electronic component.There are 100pins on it.This device operates at a voltage of 5.25Vas its maximum supply voltage.The minimal supply voltage is 4.75V.It runs on a voltage of 5Vvolts.It is recommended that the maximal frequency be lower than 83.3MHz.
M5-192/68-15VC/1 Features
100-LQFP package
68 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
5V power supplies
M5-192/68-15VC/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-192/68-15VC/1 CPLDs applications.
- D/T registers and latches
- High speed graphics processing
- Digital designs
- USB Bus
- TIMERS/COUNTERS
- Software Configuration of Add-In Boards
- Battery operated portable devices
- Interface bridging
- ROM patching
- State machine control
