M5-256/120-7YC/1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 160-BQFP |
| Number of Pins | 160 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-256 |
| Pin Count | 160 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 10000 |
| Max Frequency | 167MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M5-256/120-7YC/1 Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The product is contained in a 160-BQFP package.It is programmed with 120 I/Os.It is programmed to terminate devices at [0].There is a QUADterminal position on the electrical part in question.Power is provided by a supply voltage of 5V volts.There is a part included in Programmable Logic Devices.Trayshould be used to package the chip.Ensure its reliability by operating at [0].Ideally, the chip should be mounted by Surface Mount.It is a type of FPGA belonging to the MACH? 5 series.There are 160 pins on the chip.It is also possible to find YESwhen using this device.The M5-256contains its related parts.For digital circuits, there are 10000gates. These devices serve as building blocks.EEPROM is adopted for storing data.This device is mounted by Surface Mount.There are 160pins on it.A voltage of 5.25V is the maximum supply voltage for this device.A minimum supply voltage of 4.75V is required for this device to operate.It operates from 5V power supplies.It should be below 167MHzat the maximal frequency.
M5-256/120-7YC/1 Features
160-BQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
160 pin count
160 pins
5V power supplies
M5-256/120-7YC/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-256/120-7YC/1 CPLDs applications.
- Code converters
- Portable digital devices
- ROM patching
- State machine design
- Power Meter SMPS
- Page register
- Configurable Addressing of I/O Boards
- Power up sequencing
- I2C BUS INTERFACE
- I/O expansion
