M5-256/68-10VI/1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | M5-256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 10000 |
| Max Frequency | 125MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
M5-256/68-10VI/1 Overview
In the mobile phone network, there are 256macro cells, which are cells with high-power antennas and towers.In the 100-LQFPpackage, you will find it.As a result, it has 68 I/O ports programmed.Terminations of devices are set to [0].Its terminal position is QUAD.There is 5V voltage supply for this device.It belongs to the family [0].It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].It is mounted in the way of Surface Mount.It belongs to the MACH? 5series of FPGAs.A chip with 100pins is programmed.It is also possible to find YESwhen using this device.There are related parts in [0].For digital circuits, there are 10000gates. These devices serve as building blocks.It is recommended to store data in [0].In this case, it is mounted by Surface Mount.It is designed with 100 pins.It operates at a maximum supply voltage of 5.5V volts.A minimum supply voltage of 4.5V is required for this device to operate.This device runs on 5Vvolts of electricity.It is recommended not to exceed 125MHzin terms of frequency.
M5-256/68-10VI/1 Features
100-LQFP package
68 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
5V power supplies
M5-256/68-10VI/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-256/68-10VI/1 CPLDs applications.
- State machine control
- High speed graphics processing
- Multiple DIP Switch Replacement
- PULSE WIDTH MODULATION (PWM)
- STANDARD SERIAL INTERFACE UART
- INTERRUPT SYSTEM
- Portable digital devices
- Pattern recognition
- Dedicated input registers
- Programmable power management
