M5-320/160-10YI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Number of Pins | 208 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-320 |
| Pin Count | 208 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 160 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 12500 |
| Max Frequency | 125MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 320 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
M5-320/160-10YI Overview
The mobile phone network has 320 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).You can find it in package [0].As a result, it has 160 I/O ports programmed.Terminations of devices are set to [0].There is a QUADterminal position on the electrical part in question.Power is supplied by a voltage of 5V volts.It is included in Programmable Logic Devices.As a result, it is packaged as Tray.Ensure its reliability by operating at [0].Ideally, the chip should be mounted by Surface Mount.The FPGA belongs to the MACH? 5 series.It is equipped with 208 pin count.When using this device, YEScan also be found.According to the M5-320, its related parts can be found.A digital circuit can be constructed using 12500gates.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended to store data in [0].A Surface Mountis mounted on this electronic component.208pins are included in its design.In this case, the maximum supply voltage is 5.5V.It is powered by 4.5Vas its minimum supply voltage.It runs on a voltage of 5Vvolts.It is recommended that the maximal frequency be lower than 125MHz.
M5-320/160-10YI Features
208-BFQFP package
160 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
208 pins
5V power supplies
M5-320/160-10YI Applications
There are a lot of Lattice Semiconductor Corporation M5-320/160-10YI CPLDs applications.
- Programmable power management
- State machine design
- White goods (Washing, Cold, Aircon ,...)
- Random logic replacement
- Configurable Addressing of I/O Boards
- STANDARD SERIAL INTERFACE UART
- Wide Vin Industrial low power SMPS
- Dedicated input registers
- High speed graphics processing
- Address decoding
