M5-320/192-12SAC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-320 |
| Pin Count | 256 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 192 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Gates | 12500 |
| Max Frequency | 100MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 320 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 12ns |
| Height Seated (Max) | 1.7mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | Non-RoHS Compliant |
M5-320/192-12SAC Overview
Currently, there are 320 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The item is packaged with 256-LBGA.It is programmed with 192 I/Os.There are 256 terminations programmed into the device.This electrical component has a terminal position of 0.An electrical supply voltage of 5V is used to power it.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].Ideally, the chip should be mounted by Surface Mount.As part of the MACH? 5series, it is a type of FPGA.There are 256 pins on the chip.When using this device, YEScan also be found.The M5-320indicates that related parts can be found.In digital circuits, 12500gates serve as building blocks.It is adopted to store data in [0].It operates with the maximal supply voltage of 5.25V.In order for it to operate, a supply voltage of 4.75Vis required.A power supply of 5Vvolts is required to operate this device.It is important to make sure that the maximum frequency is less than 100MHz.
M5-320/192-12SAC Features
256-LBGA package
192 I/Os
The operating temperature of 0°C~70°C TA
256 pin count
5V power supplies
M5-320/192-12SAC Applications
There are a lot of Lattice Semiconductor Corporation M5-320/192-12SAC CPLDs applications.
- Synchronous or asynchronous mode
- Parity generators
- Cross-Matrix Switch
- Software-driven hardware configuration
- State machine design
- Address decoding
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- I2C BUS INTERFACE
- ROM patching
