M5-320/192-7SAC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-320 |
| Pin Count | 256 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 192 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 12500 |
| Max Frequency | 167MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 320 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.7mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | Non-RoHS Compliant |
M5-320/192-7SAC Overview
There are 320 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is packaged with 256-LBGA.As you can see, this device has 192 I/O ports programmed into it.Terminations of devices are set to [0].BOTTOMis the terminal position of this electrical part.It is powered from a supply voltage of 5V.The part belongs to Programmable Logic Devices family.Ideally, the chip should be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended to mount the chip by Surface Mount.FPGAs belonging to the MACH? 5series contain this type of chip.The chip is programmed with 256 pins.It is also characterized by YES.In accordance with the [0], its related parts are listed.12500gates are used to construct digital circuits.For data storage, EEPROMis adopted.A voltage of 5.25V is the maximum supply voltage for this device.Initially, it requires a voltage of 4.75Vas the minimum supply voltage.The system runs on a power supply of 5V watts.It is recommended that the maximal frequency be lower than 167MHz.
M5-320/192-7SAC Features
256-LBGA package
192 I/Os
The operating temperature of 0°C~70°C TA
256 pin count
5V power supplies
M5-320/192-7SAC Applications
There are a lot of Lattice Semiconductor Corporation M5-320/192-7SAC CPLDs applications.
- DDC INTERFACE
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- INTERRUPT SYSTEM
- Custom state machines
- PULSE WIDTH MODULATION (PWM)
- Multiple Clock Source Selection
- TIMERS/COUNTERS
- Software-driven hardware configuration
- State machine design
- Auxiliary Power Supply Isolated and Non-isolated
