banner_page

M5-512/160-12YI

5V 0.5mm PMIC MACH? 5 Series M5-512 208 Pin 5V 208-BFQFP


  • Manufacturer: Lattice Semiconductor Corporation
  • Nocochips NO: 477-M5-512/160-12YI
  • Package: 208-BFQFP
  • Datasheet: PDF
  • Stock: 990
  • Description: 5V 0.5mm PMIC MACH? 5 Series M5-512 208 Pin 5V 208-BFQFP (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 208-BFQFP
Number of Pins 208
Operating Temperature -40°C~85°C TA
Packaging Tray
Published 1995
Series MACH® 5
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 208
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Additional Feature YES
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Supply Voltage 5V
Terminal Pitch 0.5mm
Base Part Number M5-512
Pin Count 208
Operating Supply Voltage 5V
Power Supplies 5V
Programmable Type In System Programmable
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of I/O 160
Memory Type EEPROM
Propagation Delay 12 ns
Turn On Delay Time 12 ns
Number of Gates 20000
Max Frequency 100MHz
Output Function MACROCELL
Number of Macro Cells 512
JTAG BST YES
Voltage Supply - Internal 4.5V~5.5V
Height Seated (Max) 4.1mm
Length 28mm
Width 28mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Mount Surface Mount

M5-512/160-12YI Overview


This network has 512macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is embedded in the 208-BFQFP package.It is equipped with 160I/O ports.The termination of a device is set to [0].This electrical part is wired with a terminal position of QUAD.It is powered by a voltage of 5V volts.The part belongs to Programmable Logic Devices family.Ideally, the chip should be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that Surface Mountholds the chip in place.In terms of FPGAs, it belongs to the MACH? 5 series.The chip is programmed with 208 pins.If this device is used, you will also be able to find [0].The M5-512shows its related parts.A digital circuit is built using 20000gates.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.Data is stored using [0].Surface Mountis used to mount this electronic component.There are 208 pins embedded in the device.It operates at a maximum supply voltage of 5.5V volts.The minimal supply voltage is 4.5V.It runs on 5Vvolts of power.It should be below 100MHzat the maximal frequency.

M5-512/160-12YI Features


208-BFQFP package
160 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
208 pins
5V power supplies

M5-512/160-12YI Applications


There are a lot of Lattice Semiconductor Corporation M5-512/160-12YI CPLDs applications.

  • Preset swapping
  • Digital systems
  • SUPERVISORY FUNCTION (LVD AND WATCHDOG)
  • DDC INTERFACE
  • Address decoding
  • I2C BUS INTERFACE
  • Auxiliary Power Supply Isolated and Non-isolated
  • Programmable polarity
  • Digital multiplexers
  • Custom state machines

Write a review

Note: HTML is not translated!
    Bad           Good