M5-512/256-10SAC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 352-LBGA |
| Number of Pins | 352 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 352 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-512 |
| Pin Count | 352 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 256 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 20000 |
| Max Frequency | 125MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 1.7mm |
| Length | 35mm |
| Width | 35mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
M5-512/256-10SAC Overview
512macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is embedded in the 352-LBGA package.It is equipped with 256I/O ports.There are 352 terminations programmed into the device.This electrical component has a terminal position of 0.A voltage of 5Vprovides power to the device.This part is part of the family [0].Trayshould be used to package the chip.During operation, the operating temperature is kept at 0°C~70°C TA to ensure its reliability.It is recommended that Surface Mountholds the chip in place.The MACH? 5series comprises this type of FPGA.In this chip, the 352pins are programmed.Additionally, this device is capable of displaying [0].The M5-512can be used to identify its related parts.The 20000gates serve as building blocks for digital circuits.For high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.The electronic component is mounted by Surface Mount.The device has a pinout of [0].This device operates at a voltage of 5.25V when the maximum supply voltage is applied.The minimal supply voltage is 4.75V.In order for the device to operate, it requires 5V power supplies.It is recommended that the maximal frequency be lower than 125MHz.
M5-512/256-10SAC Features
352-LBGA package
256 I/Os
The operating temperature of 0°C~70°C TA
352 pin count
352 pins
5V power supplies
M5-512/256-10SAC Applications
There are a lot of Lattice Semiconductor Corporation M5-512/256-10SAC CPLDs applications.
- Storage Cards and Storage Racks
- Synchronous or asynchronous mode
- Auxiliary Power Supply Isolated and Non-isolated
- INTERRUPT SYSTEM
- Address decoding
- DMA control
- Wide Vin Industrial low power SMPS
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- POWER-SAVING MODES
- Pattern recognition
