M5-512/256-7SAI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 352-LBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 352 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-512 |
| Pin Count | 352 |
| JESD-30 Code | S-PBGA-B352 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 256 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 20000 |
| Max Frequency | 167MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.7mm |
| Length | 35mm |
| Width | 35mm |
| RoHS Status | Non-RoHS Compliant |
M5-512/256-7SAI Overview
Currently, there are 512 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There is a 352-LBGA package containing it.In this case, there are 256 I/Os programmed.There are 352 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of BOTTOMand is connected to the ground.An electrical supply voltage of 5V is used to power it.There is a part in the family [0].It is recommended that the chip be packaged by Tray.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.Chips should be mounted by Surface Mount.It belongs to the MACH? 5series of FPGAs.The chip is programmed with 352 pins.If this device is used, you will also be able to find [0].There are related parts in [0].A digital circuit can be constructed using 20000gates.In general, it is recommended to store data in [0].This device operates at a voltage of 5.5Vas its maximum supply voltage.Normally, it operates with a voltage of 4.5VV as its minimum supply voltage.This device runs on 5Vvolts of electricity.The maximal frequency should be lower than 167MHz.
M5-512/256-7SAI Features
352-LBGA package
256 I/Os
The operating temperature of -40°C~85°C TA
352 pin count
5V power supplies
M5-512/256-7SAI Applications
There are a lot of Lattice Semiconductor Corporation M5-512/256-7SAI CPLDs applications.
- Software-driven hardware configuration
- Address decoding
- Power up sequencing
- I2C BUS INTERFACE
- Code converters
- ToR/Aggregation/Core Switch and Router
- Timing control
- I/O expansion
- Software Configuration of Add-In Boards
- Digital systems
