M5LV-128/120-10YI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 160-BQFP |
| Number of Pins | 160 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5LV-128 |
| Pin Count | 160 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 5000 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 516 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M5LV-128/120-10YI Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.You can find it in package [0].As a result, it has 120 I/O ports programmed.Terminations of devices are set to [0].This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 3.3V volts.This part is in the family [0].It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.Surface Mountshould be used for mounting the chip.In FPGA terms, it is a type of MACH? 5series FPGA.The chip is programmed with 160 pins.When using this device, YESis also available.The M5LV-128shows its related parts.For digital circuits, there are 5000gates. These devices serve as building blocks.Optimal efficiency requires a supply voltage of [0].For storing data, it is recommended to use [0].A Surface Mountis mounted on this electronic component.The device has a pinout of [0].This device operates at a voltage of 3.6Vas its maximum supply voltage.Normally, it operates with a voltage of 3VV as its minimum supply voltage.There are 516 Programmable I/Os.83.3MHzis the maximum frequency.
M5LV-128/120-10YI Features
160-BQFP package
120 I/Os
The operating temperature of -40°C~85°C TA
160 pin count
160 pins
M5LV-128/120-10YI Applications
There are a lot of Lattice Semiconductor Corporation M5LV-128/120-10YI CPLDs applications.
- Handheld digital devices
- Power Meter SMPS
- Custom shift registers
- Random logic replacement
- Multiple DIP Switch Replacement
- Timing control
- Programmable polarity
- Digital systems
- High speed graphics processing
- Wide Vin Industrial low power SMPS
