M5LV-256/104-15VI
| Parameters | |
|---|---|
| JESD-30 Code | S-PQFP-G144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 104 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Number of Gates | 10000 |
| Max Frequency | 55.6MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 15ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5LV-256 |
| Pin Count | 144 |
M5LV-256/104-15VI Overview
256 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is embedded in the 144-LQFP package.It is equipped with 104I/O ports.144terminations are programmed into the device.Its terminal position is QUAD.The power source is powered by 3.3Vvolts.There is a part in the family [0].As a result, it is packaged as Tray.A reliable operation is ensured by the operating temperature of [0].Mount the chip by Surface Mount.It is a type of FPGA belonging to the MACH? 5 series.144pins are programmed on the chip.If you use this device, you will also find [0].Its related parts can be found in the [0].As a building block for digital circuits, there are 10000gates.In order to achieve high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.There is a maximum supply voltage of 3.6Vwhen the device is operating.With a minimal supply voltage of [0], it operates.In total, there are 100programmable I/Os.It is recommended that the maximal frequency be lower than 55.6MHz.
M5LV-256/104-15VI Features
144-LQFP package
104 I/Os
The operating temperature of -40°C~85°C TA
144 pin count
M5LV-256/104-15VI Applications
There are a lot of Lattice Semiconductor Corporation M5LV-256/104-15VI CPLDs applications.
- Software Configuration of Add-In Boards
- Custom state machines
- USB Bus
- Parity generators
- Multiple DIP Switch Replacement
- I2C BUS INTERFACE
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- D/T registers and latches
- Preset swapping
- Power Meter SMPS
