M5LV-256/120-7YC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 160-BQFP |
| Number of Pins | 160 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5LV-256 |
| Pin Count | 160 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 10000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 144 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
M5LV-256/120-7YC Overview
The mobile phone network has 256 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is contained in package [0].It is equipped with 120I/O ports.Devices are programmed with terminations of [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power supply voltage is 3.3V.It is a part of family [0].It is recommended that the chip be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.It belongs to the MACH? 5series of FPGAs.Chips are programmed with 160 pins.This device is also capable of displaying [0].In accordance with the [0], its related parts are listed.The 10000gates serve as building blocks for digital circuits.If high efficiency is to be achieved, the supply voltage should be maintained at [0].Data is stored using [0].The electronic component is mounted by Surface Mount.The device is designed with pins [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.Normally, it operates with a voltage of 3VV as its minimum supply voltage.Currently, there are 144 Programmable I/Os available.It is recommended that the maximal frequency be lower than 100MHz.
M5LV-256/120-7YC Features
160-BQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
160 pin count
160 pins
M5LV-256/120-7YC Applications
There are a lot of Lattice Semiconductor Corporation M5LV-256/120-7YC CPLDs applications.
- Reset swapping
- I/O expansion
- Address decoders
- Bootloaders for FPGAs
- Dedicated input registers
- State machine control
- Pattern recognition
- Wide Vin Industrial low power SMPS
- Configurable Addressing of I/O Boards
- Digital systems
