M5LV-256/160-10YC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5LV-256 |
| Pin Count | 208 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 160 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 10000 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 144 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M5LV-256/160-10YC Overview
This network has 256macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is enclosed in a 208-BFQFP package.It is equipped with 160I/O ports.There are 208 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.There is a QUADterminal position on the electrical part in question.A voltage of 3.3Vprovides power to the device.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].Surface Mountshould be used for mounting the chip.It is a type of FPGA belonging to the MACH? 5 series.It has 208pins programmed.The device can also be used to find [0].According to the M5LV-256, its related parts can be found.It is possible to construct digital circuits using 10000gates, which are devices that serve as building blocks.High efficiency requires the supply voltage to be maintained at [0].It is recommended that data be stored in [0].There is a maximum supply voltage of 3.6V.Initially, it requires a voltage of 3Vas the minimum supply voltage.There are a total of 144 Programmable I/Os.There should be a lower maximum frequency than 83.3MHz.
M5LV-256/160-10YC Features
208-BFQFP package
160 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
M5LV-256/160-10YC Applications
There are a lot of Lattice Semiconductor Corporation M5LV-256/160-10YC CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Storage Cards and Storage Racks
- USB Bus
- Power automation
- Portable digital devices
- ROM patching
- Voltage level translation
- Bootloaders for FPGAs
- Power Meter SMPS
- White goods (Washing, Cold, Aircon ,...)
