M5LV-256/160-12YC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5LV-256 |
| Pin Count | 208 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 160 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Gates | 10000 |
| Max Frequency | 71.4MHz |
| Number of Programmable I/O | 144 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 12ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M5LV-256/160-12YC Overview
This network has 256macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).A 208-BFQFP package contains the item.It is programmed with 160 I/Os.It is programmed to terminate devices at [0].This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 3.3V volts.It is a part of family [0].It is packaged in the way of Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].There should be a Surface Mounton the chip.In FPGA terms, it is a type of MACH? 5series FPGA.There are 208pins on the chip.It is also possible to find YESwhen using this device.According to the M5LV-256, its related parts can be found.It is possible to construct digital circuits using 10000gates, which are devices that serve as building blocks.For high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].In this case, the maximum supply voltage is 3.6V.Initially, it requires a voltage of 3Vas the minimum supply voltage.A total of 144Programmable I/Os are present.The maximal frequency should be lower than 71.4MHz.
M5LV-256/160-12YC Features
208-BFQFP package
160 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
M5LV-256/160-12YC Applications
There are a lot of Lattice Semiconductor Corporation M5LV-256/160-12YC CPLDs applications.
- PLC analog input modules
- Digital systems
- Random logic replacement
- USB Bus
- Preset swapping
- Complex programmable logic devices
- ON-CHIP OSCILLATOR CIRCUIT
- Pattern recognition
- Software Configuration of Add-In Boards
- Dedicated input registers
