M5LV-256/160-5YC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5LV-256 |
| Pin Count | 208 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 160 |
| Memory Type | EEPROM |
| Propagation Delay | 5.5 ns |
| Number of Gates | 10000 |
| Max Frequency | 133MHz |
| Number of Programmable I/O | 144 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5.5ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M5LV-256/160-5YC Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is part of the 208-BFQFP package.There are 160 I/Os on the board.It is programmed to terminate devices at [0].QUADis the terminal position of this electrical part.The device is powered by a voltage of 3.3V volts.The part is included in Programmable Logic Devices.As a result, it is packaged as Tray.To ensure its reliability, the operating temperature is set to [0].Chips should be mounted by Surface Mount.As part of the MACH? 5series, it is a type of FPGA.There are 208 pins on the chip.When using this device, YESis also available.You can find its related parts in the [0].The 10000gates serve as building blocks for digital circuits.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].There is a maximum supply voltage of 3.6Vwhen the device is operating.With a minimal supply voltage of [0], it operates.A total of 144 Programmable I/Os are available.There should be a lower maximum frequency than 133MHz.
M5LV-256/160-5YC Features
208-BFQFP package
160 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
M5LV-256/160-5YC Applications
There are a lot of Lattice Semiconductor Corporation M5LV-256/160-5YC CPLDs applications.
- Cross-Matrix Switch
- Random logic replacement
- Power Meter SMPS
- Address decoding
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Complex programmable logic devices
- I/O expansion
- PULSE WIDTH MODULATION (PWM)
- Parity generators
- Synchronous or asynchronous mode
