M5LV-256/68-10YI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5LV-256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 10000 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 144 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
M5LV-256/68-10YI Overview
Currently, there are 256 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The item is packaged with 100-BQFP.The device has 68inputs and outputs.There are 100 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 3.3V is used as the power supply for this device.This part is included in Programmable Logic Devices.Package the chip by Tray.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.As part of the MACH? 5series, it is a type of FPGA.A chip with 100pins is programmed.This device also displays [0].There are related parts in [0].In digital circuits, there are 10000gates, which act as a basic building block.If high efficiency is to be achieved, the supply voltage should be maintained at [0].Data storage is performed using [0].In this case, Surface Mountis used to mount the electronic component.100pins are included in its design.This device operates at a voltage of 3.6Vas its maximum supply voltage.Despite its minimal supply voltage of [0], it is capable of operating.A total of 144programmable I/Os are available.83.3MHzis the maximum frequency.
M5LV-256/68-10YI Features
100-BQFP package
68 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
M5LV-256/68-10YI Applications
There are a lot of Lattice Semiconductor Corporation M5LV-256/68-10YI CPLDs applications.
- State machine control
- Power up sequencing
- Reset swapping
- PULSE WIDTH MODULATION (PWM)
- Software-driven hardware configuration
- LED Lighting systems
- Dedicated input registers
- Address decoders
- Storage Cards and Storage Racks
- Software-Driven Hardware Configuration
